13. Save And Tools; Save Configuration; Firmware Upgrade & Backup; Firmware Upgrade From Http - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

13. Save and Tools

Save Configuration

Firmware Upgrade & Backup
Configuration Restore & Backup
Log Backup
Ping
Trace Route
Language Management
Reset
Reboot System
Save Configuration
This window is used to save the running configuration to the start-up configuration or the file system of
the Switch. This is to prevent the loss of configuration in the event of a power failure.
To view the following window, click Save > Save Configuration, as shown below:
The fields that can be configured are described below:
Parameter
Unit
File Path
Click the Apply button to save the configuration.
Firmware Upgrade & Backup

Firmware Upgrade from HTTP

This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from
HTTP, as shown below:
The fields that can be configured are described below:
Figure 13-1 Save Configuration window
Description
Select the switch unit that will be used for this configuration here.
Enter the filename and path in the space provided.
Figure 13-2 Firmware Upgrade from HTTP window
371