Upload Firmware To Rcp; Upload Firmware To Http - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Destination File
Source File
Click Upload to initiate the upload.

Upload Firmware to RCP

This window allows the user to upload firmware from the Switch to a RCP Server.
The fields that can be configured are described below:
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Upload to initiate the upload.

Upload Firmware to HTTP

This window allows the user to upload firmware from the Switch to a HTTP Server.
Figure 12-8 Upload Firmware to TFTP window
Description
Use the drop-down menu to select a unit for uploading the firmware.
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6 Click the radio button to enter the TFTP server IPv6 address used.
Domain Name Click the radio button to enter the domain name.
Enter the location and name of the Destination File.
Enter the location and name of the Source File.
Figure 12-9 Upload Firmware to RCP window
Description
Enter the RCP Server IP Address used.
Enter the appropriate Username used.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
382