Bgp Neighbor - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

BGP Neighbor

Neighbor
This window is used to view and configure the BGP neighbor settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor, as shown below:
The fields that can be configured in Neighbor Settings are described below:
Parameter
IP Address
VRF Name
Remote AS Number
Action
Click the Apply button to accept the changes made.
The fields that can be configured in Neighbor Table are described below:
Figure 6-174 Neighbor Window
Description
Select IPv4 and enter the IPv4 address of the neighbor peer here.
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Please Select
button to open a new window to select and use a configured VRF
instance from the list.
Enter the remote BGP neighbor's AS number here. The range is from
1 and 4294967295.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
297