Bgp Neighbor Settings - D-Link DGS-3612G - xStack Switch Reference Manual

BGP Neighbor Settings

This window is used to configure a Border Gateway Protocol (BGP) neighbor.
To view this window, click L3 Features > BGP > BGP Neighbor Settings, as shown below:
To configure BGP neighbor peer group settings on the Switch, complete the following fields:
Parameter
Peer Group Name
IP Address
Remote AS Number
(1-65535)
Peer Group Name
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 4- 138. BGP Neighbor Peer Group Settings window
Description
BGP Neighbor Peer Group Settings
Enter the name of the BGP peer group.
BGP Neighbor Settings
Enter the IP address of the BGP speaking neighbor.
Enter the number of autonomous systems to which the peer group belongs to. The range is
from 1 to 65535.
Enter the name of the BGP peer group.
278