Supermicro SSE-G2252 User Manual page 99

Menu
Show Rule
IP
General
Ping
ARP
Configure General
Show Information
IPv6 Configuration
Configure Global
Configure Interface
Add IPv6 Address
Show IPv6 Address
Show IPv6 Neighbor
Cache
Show Statistics
IPv6
ICMPv6
UDP
IP Service
DNS
General
Configure Global
Add Domain Name
Show Domain
Names
Add Name Server
Show Name Servers Shows the name server address list
Static Host Table
Add
Show
Modify
Cache
Table 4-2. Switch Main Menu (Continued)
Description
Shows the time specified by a rule
Sends ICMP echo request packets to another node on the network
Address Resolution Protocol
Sets the aging time for dynamic entries in the ARP cache
Shows entries in the Address Resolution Protocol (ARP) cache
Sets an IPv6 default gateway for traffic with no known next hop
Configures IPv6 interface address using auto-configuration or
link-local address, and sets related protocol settings
Adds an global unicast, EUI-64, or link-local IPv6 address to an
interface
Show the IPv6 addresses assigned to an interface
Displays information in the IPv6 neighbor discovery cache
Shows statistics about IPv6 traffic
Shows statistics about ICMPv6 messages
Shows statistics about UDP messages
Domain Name Service
Enables DNS lookup; defines the default domain name appended to
incomplete host names
Defines a list of domain names that can
be appended to incomplete host names
Shows the configured domain name list
Specifies IP address of name servers for dynamic lookup
Configures static entries for domain name to address mapping
Shows the list of static mapping entries
Modifies the static address mapped to the selected host name
Displays cache entries discovered by designated
name servers
Chapter 4: Using the Web Interface
4-17