Supermicro SSE-G2252 User Manual page 94

SSE-G2252/SSE-G2252P Switches User's Manual
Menu
Show Information
Summary
Statistics
Authorization
Configure Method
Add
Show
Configure Service
Show Information
User Accounts
Add
Show
Modify
Web Authentication
Configure Global
Configure Interface
Network Access
Configure Global
Configure Interface
General
Link Detection
Configure MAC Filter
Add
Show
Show Information
HTTPS
Configure Global
Copy Certificate
SSH
Table 4-2. Switch Main Menu (Continued)
Description
Shows the configured accounting methods, and the methods applied
to specific interfaces
Shows basic accounting information recorded for user sessions
Enables authorization of requested services
Configures authorization for various service types
Shows the authorization settings used for various service types
Sets the authorization method applied used for the console port, and
for Telnet
Shows the configured authorization methods, and the methods
applied to specific interfaces
Configures user names, passwords, and access levels
Shows authorized users
Modifies user attributes
Allows authentication and access to the network when 802.1X or
Network Access authentication are infeasible or impractical
Configures general protocol settings
Enables Web Authentication for individual ports
MAC address-based network access authentication
Enables aging for authenticated MAC addresses, and sets the time
period after which a connected MAC address must be
reauthenticated
Enables MAC authentication on a port; sets the maximum number of
address that can be authenticated, the guest VLAN, dynamic VLAN
and dynamic QoS
Configures detection of changes in link status, and the response (i.e.,
send trap or shut down port)
Specifies MAC addresses exempt from authentication
Shows the list of exempt MAC addresses
Shows the authenticated MAC address list
Secure HTTP
Enables HTTPs, and specifies the UDP port to use
Replaces the default secure-site certificate
Secure Shell
4-12