Supermicro SSE-G2252 User Manual page 90

SSE-G2252/SSE-G2252P Switches User's Manual
Menu
VLAN Trunking
VLAN
Static
Configure VLAN
Modify VLAN and
Member Ports
Edit Member by Interface Specifies VLAN attributes per interface
Edit Member by Interface
Range
Dynamic
Configure General
Configure Interface
Show Dynamic VLAN
Show VLAN
Show VLAN
Member
Configure VLAN
Add
Show
Add Community VLAN
Show Community VLAN
Configure Interface
Tunnel
Configure Global
Configure Interface
Protocol
Configure Protocol
Add
Show
Configure Interface
Add
Show
IP Subnet
Add
Show
Table 4-2. Switch Main Menu (Continued)
Description
Allows unknown VLAN groups to pass through the specified interface
Virtual LAN
Configures VLAN groups, administrative status, and remote type
Configures group name, status, and member attributes
Specifies VLAN attributes per interface range
Enables GVRP VLAN registration protocol globally
Configures GVRP status and timers per interface
Shows the VLANs this switch has joined through GVRP
Shows the interfaces assigned to a VLAN through GVRP
Creates primary or community VLANs
Display configured primary and community VLANs
Associates a community VLAN with a primary VLAN
Shows the community VLANs associated with a primary VLAN
Sets the private VLAN interface type, and associates the
interfaces with a private VLAN
IEEE 802.1Q (QinQ) Tunneling
Sets tunnel mode for the switch
Sets the tunnel mode for any participating interface
Creates a protocol group, specifying supported protocols
Shows configured protocol groups
Maps a protocol group to a VLAN
Shows the protocol groups mapped to each VLAN
Maps IP subnet traffic to a VLAN
Shows IP subnet to VLAN mapping
4-8