Supermicro SSE-G2252 User Manual page 96

SSE-G2252/SSE-G2252P Switches User's Manual
Menu
Authenticator
Supplicant
IP Source Guard
Port Configuration
Static Binding
Add
Show
Dynamic Binding
Administration
Log
System
Configure Global
Show Logs
Remote
SMTP
Configure Server
Add
Show
Configure General
LLDP
Configure Global
Configure Interface
Configure General
Add CA-Type
Show CA-Type
Modify CA-Type
Show Local Device
Information
General
Port/Trunk
Show Remote Device
Information
Port/Trunk
Table 4-2. Switch Main Menu (Continued)
Description
Displays protocol statistics for port authenticator
Displays protocol statistics for port supplicant
Filters IP traffic based on static entries in the IP Source Guard table,
or dynamic entries in the DHCP Snooping table
Enables IP source guard and selects filter type per port
Adds a static addresses to the source-guard binding table
Shows static addresses in the source-guard binding table
Displays the source-guard binding table for a selected interface
Stores error messages in local memory
Shows logged error messages
Configures the logging of messages to a remote logging process
Sends an SMTP client message to a participating server
Configures a list of recipient SMTP servers
Adds a recipient SMTP server
Shows configured SMTP servers
Sets SMTP status, e-mail source and destination addresses
Configures global LLDP timing parameters
Sets the message transmission mode, enables SNMP notification,
and sets the LLDP attributes to advertise
Specifies the location of the device attached to an interface
Shows the location of the device attached to an interface
Modifies the location of the device attached to an interface
Displays general information about the local device
Displays information about each interface
Displays information about a remote device connected to a port on
this switch
4-14