Supermicro SSE-G2252 User Manual page 100

SSE-G2252/SSE-G2252P Switches User's Manual
Menu
DHCP
Snooping
Configure Global
Configure VLAN
Configure Interface
Show Information
Multicast
IGMP Snooping
General
Multicast Router
Add Static Multicast
Router
Show Static
Multicast Router
Show Current
Multicast Router
IGMP Member
Add Static Member
Show Static Member
Show Current
Member
Interface
Configure
Show
Forwarding Entry
Filter
Configure General
Configure Profile
Add
Show
Add Multicast
Group Range
Show Multicast
Group Range
Table 4-2. Switch Main Menu (Continued)
Description
Dynamic Host Configuration Protocol
Enables DHCP snooping globally, MAC-address verification,
information option; and sets the information policy
Enables DHCP snooping on a VLAN
Sets the trust mode for an interface
Displays the DHCP Snooping binding information
Enables multicast filtering; configures parameters for multicast
snooping
Assigns ports that are attached to a neighboring multicast router
Displays ports statically configured as attached to a neighboring
multicast router
Displays ports attached to a neighboring multicast router, either
through static or dynamic configuration
Statically assigns multicast addresses to the selected VLAN
Shows multicast addresses statically configured on the selected
VLAN
Shows multicast addresses associated with the selected VLAN,
either through static or dynamic configuration
Configures IGMP snooping per VLAN interface
Shows IGMP snooping settings per VLAN interface
Displays the current multicast groups learned through IGMP
Snooping
Enables IGMP filtering for the switch
Adds IGMP filter profile; and sets access mode
Shows configured IGMP filter profiles
Assigns multicast groups to selected profile
Shows multicast groups assigned to a profile
4-18