Supermicro SSE-G2252 User Manual page 107

• Traffic Classes – This switch provides mapping of user priorities to multiple traffic
classes. (Refer to
• Static Entry Individual Port – This switch allows static filtering for unicast and
multicast addresses. (Refer to
• VLAN Version Number – Based on IEEE 802.1Q, "1" indicates Bridges that
support only single spanning tree (SST) operation, and "2" indicates Bridges that
support multiple spanning tree (MST) operation.
• VLAN Learning – This switch uses Independent VLAN Learning (IVL), where each
port maintains its own filtering database.
• Local VLAN Capable – This switch does not support multiple local bridges outside
of the scope of 802.1Q defined VLANs.
• Configurable PVID Tagging – This switch allows you to override the default Port
VLAN ID (PVID used in frame tags) and egress status (VLAN-Tagged or Untagged)
on each port. (Refer to
• Max Supported VLAN Numbers – The maximum number of VLANs supported on
this switch.
• Max Supported VLAN ID – The maximum configurable VLAN identifier supported
on this switch.
• GMRP – GARP Multicast Registration Protocol (GMRP) allows network devices to
register end stations with multicast groups. This switch does not support GMRP; it
uses the Internet Group Management Protocol (IGMP) to provide automatic
multicast filtering.
Web Interface
To view Bridge Extension information:
1. Click S , then C
YSTEM
2. Then click A
PPLY
Chapter 11: "Class of Service" on page
Section 8-1: "Setting Static Addresses" on page
Chapter 7: "VLAN Configuration" on page
.
APABILITY
.
Chapter 5: Basic Management Tasks
5-5
11-1.)
7-1.)
8-1.)