Dot1X Re-Authenticate; Dot1X Retry - HP 5920 Command Reference Manual

Related commands
display dot1x
•
dot1x timer
•

dot1x re-authenticate

Use dot1x re-authenticate to enable the periodic online user re-authentication function.
Use undo dot1x re-authenticate to disable the function.
Syntax
dot1x re-authenticate
undo dot1x re-authenticate
Default
The periodic online user re-authentication function is disabled.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Periodic re-authentication enables the access device to periodically authenticate online 802.1X users on
a port. This function tracks the connection status of online users and updates the authorization attributes
assigned by the server, such as the ACL, VLAN.
You can use the dot1x timer reauth-period command to configure the interval for re-authentication.
Examples
# Enable the 802.1X periodic online user re-authentication function on Ten-GigabitEthernet 1/0/1 and
set the periodic re-authentication interval to 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x re-authenticate
Related commands
• display dot1x
dot1x timer
•

dot1x retry

Use dot1x retry to set the maximum number of attempts for sending an authentication request to a client.
Use undo dot1x retry to restore the default.
103