SNTP commands
display sntp sessions
Use display sntp sessions to display information about all SNTP associations.
Syntax
display sntp sessions
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display information about all SNTP associations.
<Sysname> display sntp sessions
SNTP server
1.0.1.11
Table 17 Command output
Field
SNTP server
Stratum
Version
Last receive time
sntp authentication enable
Use sntp authentication enable to enable SNTP authentication.
Use undo sntp authentication enable to disable SNTP authentication.
Syntax
sntp authentication enable
undo sntp authentication enable
Stratum
Version
2
4
Description
SNTP server (NTP server). If this field displays 0.0.0.0, the IP address of the NTP
server has not been resolved successfully.
Stratum level of the NTP server, which determines the clock accuracy. It is in the
range of 1 to 16. A lower stratum level represents higher clock accuracy. A clock
with stratum level 16 is not synchronized.
SNTP version.
Time when the last message was received. Synced means the local clock is
synchronized to the NTP server.
Last receive time
Tue, May 17 2011
9:11:20.833 (Synced)
106