Dot1X Re-Authenticate - HP 5120 SI series Command Reference Manual

undo dot1x quiet-period
View
System view
Default level
2: System level
Parameters
None
Description
Use the dot1x quiet-period command to enable the quiet timer. When a client fails 802.1X authentication,
the device must wait a period of time before it can process authentication requests from the client.
Use the undo dot1x quiet-period command to disable the timer.
By default, the quite timer is disabled.
Related commands: display dot1x and dot1x timer.
Examples
# Enable the quiet timer.
<Sysname> system-view
[Sysname] dot1x quiet-period

dot1x re-authenticate

Syntax
dot1x re-authenticate
undo dot1x re-authenticate
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the dot1x re-authenticate command to enable the periodic online user re-authentication function.
Use the undo dot1x re-authenticate command to disable the function.
By default, the periodic online user re-authentication function is disabled.
Periodic re-authentication enables the access device to periodically authenticate online 802.1X users on
a port. This function tracks the connection status of online users and updates the authorization attributes
assigned by the server, such as the ACL, VLAN, and user profile-based QoS.
You can use the dot1x timer reauth-period command to configure the interval for re-authentication.
Related commands: dot1x timer reauth-period.
108