Dot1X Re-Authenticate Manual - HP FlexNetwork 7500 Series Command Reference Manual

Default
The 802.1X periodic reauthentication feature is disabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Periodic reauthentication enables the access device to periodically authenticate online 802.1X users
on a port. This feature tracks the connection status of online users and updates the authorization
attributes assigned by the server, such as the ACL and VLAN.
You can use the dot1x timer reauth-period command to configure the interval for reauthentication.
Examples
# Enable the 802.1X periodic reauthentication feature on Ten-GigabitEthernet 1/0/1, and set the
periodic reauthentication interval to 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x re-authenticate
Related commands
display dot1x
dot1x timer

dot1x re-authenticate manual

Use dot1x re-authenticate manual to manually reauthenticate all online 802.1X users on a port.
Syntax
dot1x re-authenticate manual
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After this command is executed, this device reauthenticates all online 802.1X users on a port. The
command takes effect regardless of the server-assigned reauthentication attribute and the periodic
reauthentication feature.
Examples
# Manually reauthenticate all online 802.1X users on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
194