Show Ipv6 Pim Neighbor - Dell Networking 7048 Reference Manual

InterfaceVLAN0001
ModeSparse
Hello Interval (secs)30
Join Prune Interval (secs)60
DR Priority1
BSR BorderDisabled
Neighbor Count1
Designated Router2001:db8:85a3:0:0:8a2e:370:7334
If none of the interfaces are enabled for PIM, the following message is
displayed:
None of the routing interfaces are enabled for PIM

show ipv6 pim neighbor

Use the show ipv6 pim neighbor command to display IPv6 PIM neighbors
discovered by PIMv2 Hello messages. If the interface number is not specified,
this command displays the neighbors discovered on all the PIM-enabled
interfaces.
Syntax
show ipv6 pim neighbor [vlan
Parameter
vlan-id
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
1052
IPv6 PIM Commands
vlan-id
Description
A valid VLAN ID for which multicast routing has been enabled.
]