Printing Thick Paper - Xante ColourLaser 21 Series Setup Manual

18
Check the Media Settings (cont.)

Printing Thick Paper

(Card Stock, Index Paper)
!
The maximum usable paper weight for duplex
printing is 28 lb.
!
Failure to change the printer's media
settings before printing on thick paper
will damage the printer.
Print Path
• Input: Tray1 (up to 27 lb US Bond)
or Multi-Purpose (MP) Tray (up to 110 lb
Index)
• Output: Rear Exit Only
Individual Print Jobs
For individual print jobs on thick paper, change the
settings in the driver as you print the job (File
Properties [or Settings, or your application's equivalent]):
• Source: Tray1 (up to 27 lb)
or Multi-Purpose Tray (up to 110 lb)
• Size: Letter Short Edge, Letter Long Edge, Legal-13,
Legal-14, Legal-13.5, Tabloid, Tabloid Extra,
Executive, A3, A4 Short Edge, A4 Long Edge,
A5, A6, B4, B5 Short Edge, B5 Long Edge, or
Custom (must be defined and saved in driver)
• Type: Medium Heavy to Ultra Heavy
(see table on page 23)
Changing the Default Settings
If you consistently use thick paper in Tray 1 or the MP
Tray, enter the printer menu (see page 26) and change the
settings for the paper path you are using for the thick
paper as indicated below.
Printer Menu Settings: Thick Paper in Tray 1
• Tray 1 MediaWeight: Medium Heavy to Ultra Heavy
Printer Menu Settings: Thick Paper in MP Tray
• MP Tray Paper Size:
• MP Tray MediaWeight: Medium Heavy
® ®
Print
(see table on page 23)
Letter Short Edge, Letter Long
Edge, Legal-13, Legal-14,
Legal-13.5, Tabloid, Tabloid
Extra, Executive, A3, A4 Short
Edge, A4 Long Edge, A5, A6,
B4, B5 Short Edge, B5 Long
Edge, or Custom (must be
defined and saved in driver)
25