Installing The New Cartridge - Xante Accel-a-Writer 8200 Manual

Installing the New Cartridge

Your Accel-a-Writer 8200 uses a standard EP-BII toner cartridge, or
if you purchased the extra wide print option, the printer uses the
EP-BIIX extra wide cartridge. Both cartridges load in the same
manner.
To install a new EP-BII toner cartridge
1. Remove the new toner cartridge from its package and gently
rock it to distribute the toner evenly in the cartridge (fig. 6.12).
2. Grasp the center tab labeled "Remove the black sheet slowly"
and gently pull out and discard the black plastic protective
sheet with its securing tape from the center of the toner
cartridge.
___________________________________
Fig. 6.12 Distribute the Toner
Routine Operations 6-29