Paper Feeder - Xante Accel-a-Writer 8300 Introduction Manual

The optional duplexer allows you to print on both sides of the paper.
You can choose edge (side-to-side, standard book style) or tumble
(flip chart style) duplexing. See "Duplexing" in chapter 7 for details.

Paper Feeder

You can install up to two additional paper feeders, each of which can
hold a 250 sheet cassette. The paper cassettes and manual feed tray
can be used to increase the capacity for a single media size with the
tray chaining option or as sources for different sizes or types of print
media. For example, to use both letter and ledger size media, load up
to 250 sheets of one size in the standard cassette and 250 sheets of
the other size in an optional cassette or the manual feed tray.
Installing the Paper Feeder
1. Unpack the paper feeder and, with the connector to the back
left, set the feeder next to the printer.
2. Turn off your printer and disconnect the power cord and all
interface cables.
Warning! The printer weighs approximately 33 lbs (15 kg)
without the toner, cassettes, and media installed. Have
someone help you lift it.
3. Hold the printer above the feeder, making sure not to lift it by
the multipurpose feeder or the feed roller. Lower the printer
onto the feeder, aligning the feeder pegs with the printer
connectors (fig. 2.6).
2-12 Installationbb _________________________________________