Note: PPD options override printer default settings for a specific
job or for all jobs sent to the printer from your host.
Selecting Menu Options
The following example explains changing the printer's default
resolution from the standard 600 x 600 dpi to optional 1200 x 1200
dpi using control keys and configuration menus.
1.
Make sure the printer is on and idle.
2.
Press the MENU key until SETUP:MISC appears.
3.
Press the Enter key to enter the Miscellaneous menu.
4.
Press the Menu key until MISC:DPI appears.
5.
Press the Enter key to enter the DPI menu.
6.
Press the Menu key until dpi:1200 1200 appears.
7.
Press the Enter key to select 1200 dpi as the default. The selection
changes to all capital letters, indicating that is the current default.
8.
Press the On Line key. READY/IDLE appears.
The printer's default resolution is now 1200 x 1200 dpi.
Resetting to Factory Defaults
There are two levels for resetting to factory defaults: Level 1 (full
reset) and Level 2 (partial reset).
Level 1 Reset
Level 1 resets all printer options to factory default settings.
To do a level 1 reset, turn off the printer, press and hold down the
Online, Tray Select, and Test keys simultaneously, and then turn on
the printer. Release the keys after RESET 1 appears in the window.
6-6
Configurationbb
______________________________________