Removing Toner Cartridges - Xante Accel-a-Writer Accel-a-Writer 3DN Supplementary Manual

Xante accel-a-writer accel-a-writer 3dn: supplementary guide

Hide thumbs Also See for Accel-a-Writer Accel-a-Writer 3DN:

If you have a toner vacuum, use it to remove all loose toner in the printer before shipping it.

Removing Cables, Cassette(s), and Media

Turn off the power to the printer, and if a 2,000 sheet feeder is attached, turn off the power to it.

Disconnect the printer power cord and all attached interface cables. If a 2,000 sheet feeder is

attached, disconnect its power cord.

Remove any paper cassettes in the printer. Remove any loaded media, including that in the printer

or in an optional feeder. Store the media according to guidelines in your printer user's guide.

Removing Toner Cartridges

Squeeze the latch on the top cover to release the lock (fig. 1); then, lift the top cover (fig. 2). The

multipurpose feeder opens automatically as you open the top cover.

Caution:

Do not touch any parts inside the printer.

Fig. 1 Release the Top Cover Latch

Remove the toner cartridge by grasping its handles and pulling it slowly out of the printer (fig. 3).

Caution:

Once you begin pulling the cartridge out of the printer, remove it completely. The

cartridge's shutter may not open properly if the cartridge is pulled partially out and then

pushed back in the printer.

Fig. 3 Remove the Toner Cartridge

________________________________________________________________

Fig. 2 Open the Top Cover

Repacking Procedure 3

Table of Contents