Saving A Configuration - Printronix SLPA7000 User Manual

•
•
•
•
•
•
•
3. When the desired submenu displays, press the + or – key to scroll
through the values or options.
4. Press the
selected value or option.
5. If there are more submenu values or options you want to change, use the
. .
.
any time, you may press the
6. At any time, you may press the PAUSE key twice to exit the Configuration
menu and place the printer online. Once you have finished selecting all
your options, save your configuration.
IMPORTANT
If you do not save your configuration, all your new values will be lost
when you power off the printer.

Saving A Configuration

You can save up to eight different configurations to meet eight unique print job
requirements. These configurations are saved and stored in the printer and
are not lost when the printer is turned off.
NOTE: If the Protect Configs. option is enabled, the new configuration will not
Follow these steps to save a new configuration:
1. Press the
MENU MODE
CONFIG. CONTROL
2. Press the ↓ key until the following message displays:
Save Config.
1*
3. Press the + or – key to cycle through the options (1-8). Note that "Factory"
is not listed, because no changes made to the factory configuration can
be saved under Factory.
Ver Image Shift
Hor Image Shift
Orientation
Gap/Mark Sensor
Auto Calibrate
Save Config.
Power-Up Config.
↵
key to select a value. An asterisk (*) displays next to the
, ↑, ↓, +, and – keys to access the value and the
be saved until the existing configuration is deleted.
. .
key until the following message displays:
.
Saving A Configuration
↵
. .
key to return to the Main menu.
.
key to select it. At
75