Table of Contents
Advertisement
Mounting Stand
Product Sensor
Figure 72. Product Sensor Adjustment
The product sensor mounts on the side of the conveyor and detects the
presence of the product and activates the print cycle. The print cycle begins
by printing a label and feeding it to the applicator. The system then waits the
designated Delay Time, after which the applicator extends to place the label,
then returns to await the beginning of the next print command. The mounting
position of the product sensor determines the rough placement of the label on
the product (see "Label Application (Positioning) Adjustments" on page 68).
The DB9 Connector located on the back of the SLPA connects the product
sensor to the SLPA.
331
Advertisement
Table of Contents
Troubleshooting
