Printronix SLPA7000 User Manual page 376

Appendix F
Replace The RFID Antenna And Encoder Assemblies
Figure 87. Installing the RFID Encoder Assembly
5. Align the captive thumb nut over the mounting stud closest to you. Align
the notch in the RFID encoder assembly over the mounting stud furthest
from you. (Figure 87.)
6. Secure the RFID encoder assembly by tightening the captive thumb nut.
376
Notch
Mounting Stud (2)
Captive
Thumb Nut
RFID Encoder
Assembly