Optional Features - Printronix SLPA7000 User Manual

Chapter 1
The T5000e Series Label Printer

Optional Features

The following options are also available:
•
PPI1 and PPI2 Interpreters: PPI1 (Zebra
interpreters are powerful integration tools that allow the SLPA to function
in virtually all legacy ZPL and TEC application environments without
requiring modifications to the host data stream. PPI1 (Zebra) enables you
to print files formatted for Zebra printers to the Printronix SLPA. PPI2
(TEC) prints files formatted for TEC printers to the Printronix SLPA.
•
Fonts: A selection of fonts can be loaded from the host computer into
printer memory. Once loaded, these fonts are accessed in the same way
as the resident fonts. See Table 17 on page 358 for a list of optional fonts.
•
Memory Expansion (for non-IPDS printers only):
•
•
•
Heavy Duty Media Cutter: Automatically cuts up to 0.010" thick printed
tag stock as the media exits the printer. Available for 4, 6, and 8 inch
printers.
•
Standard Duty Media Cutter: Automatically cuts up to 0.008" thick
printed tag stock as the media exits the printer. Available for 4 inch
printers only.
•
Twinax/Coax Host Interface: Provides connection to a host computer
system using a coaxial or twinaxial interface.
•
Dual NIC (10/100Base-T & 802.11b wireless): The Dual NIC (network
interface card) provides both 10/100Base-T or 802.11b wireless
connectivity in one. The card provides wireless connectivity without the
expansive cabling and reconfigurations required from a wired network. It
also provides 10/100Base-T for wired network and wireless back up. The
remote management software, a powerful printer management tool, is
standard with the Dual NIC (10/100Base-T & 802.11b wireless).
•
NIC (10/100Base-T) Internal or External: The NIC 10/100Base-T
connectivity option provides wired networks in either an internal or
external option that allows you to attach the printer to a LAN (local area
network) instead of directly to a host computer. The remote management
software is standard with this option.
•
IPDS: Available for coax/twinax, a NIC, or a combination of both. The
printer may be ordered with this option installed and the required
hardware to support it, or it can be field installed by an authorized service
representative at a later date. The printer must have a coax/twinax
interface or NIC, 300 dpi printhead, 16 MB DRAM, and 10 MB flash
memory installed to support this field-installed option.
•
TN5250/TN3270: Enables your printer to communicate with an IBM host
through a NIC using the 5250/3270 datastream. This feature allows you
to use an application generated for the twinax/coax emulation to be
printed through the NIC.
24
16MB DRAM SIMM (single in-line memory module): Provides
additional memory to accommodate long label formats.
10MB Flash SIMM: Provides additional memory for forms, logos, and
fonts.
® ®
) and PPI2 (TEC )