Table of Contents
Advertisement
Chapter
2
Setup
Pivoting Deck
25. Ensure that the label path is clear of obstructions, then close the pivoting
deck and rotate the deck lock lever fully counterclockwise. This locks the
pivoting deck and printhead assembly into the printing position.
IMPORTANT
Ensure the pivoting deck is down and locked before attempting to
advance media or print. Failure to do so will cause the PRINTHEAD UP
fault message to display.
26. Press the Pause key to place the SLPA online, and send a label format
via the host.
48
Figure 16. Locking the Pivoting Deck
Deck Lock
Lever
Advertisement
Table of Contents
Troubleshooting
