Route The Data And Power Cables - Printronix SLPA7000 User Manual

Route The Data And Power Cables

J10
Figure 88. Routing and Connecting the Power and Data Cables
7. Route the power and data cables through the three wire saddles as
shown in Figure 88.
8. Plug the power cable large connector into the J9 receptacle on the
controller board.
9. Plug the P10 data cable connector into the J10 receptacle on the
controller board.
Wire Saddle (3)
Power Cable
Large Connector
J9
Data Cable
P10 Data Cable
Connector
Route The Data And Power Cables
Power Cable
377