Error Messages - Printronix SLPA7000 User Manual

Error Messages

The RFID encoder can detect a number of errors. When one of these errors
occurs, the RFID encoder alerts the printer to perform the currently selected
error action (see "Error Handling" in the Smart Label RFID Printer Quick
Setup Guide ) and display the appropriate error message on the control
panel's LCD (see Table 18).
Message
RFID MAX RETRY
Check System
RFID Comm Err
Check Cable
RFID TAG FAILED
Check Media
Table 18. RFID Messages
Explanation
Error Handling = Overstrike in
the RFID CONTROL menu, and
the Label Retry count has been
exhausted.
RFID error: communication
cannot be established with the
RFID encoder. Reader will be
set to Disable in the RFID
CONTROL menu and the
previous port settings restored.
Error Handling = Stop in the
RFID CONTROL menu, and the
RFID encoder could not read
the RFID tag.
Route The Data And Power Cables
Solution
Press PAUSE to clear the
message.
See "Troubleshooting" on
page 380.
Press PAUSE to clear the
message.
See "Troubleshooting" on
page 380.
Press PAUSE to clear the
message.
See "Troubleshooting" on
page 380.
379