Table of Contents
Advertisement
Mounting The Beacon
Beacon Assembly
Mounting
Holes
If a beacon option was ordered with the system, it is advisable to mount it
before mounting the SLPA to the conveyor line. To mount the beacon post:
1. Orient the mounting holes of the beacon to the holes on the side panel of
the SLPA and secure into place using the provided screws.
2. Connect the 5-pin connector assembly of the beacon to the 5-pin plug
located on the side panel of the SLPA (Power Panel).
Figure 68. Beacon Mounting
Mounting The Beacon
327
Advertisement
Table of Contents
Troubleshooting
