Requesting An Rfid Report - Printronix SLPA7000 User Manual

Admin User Submenus
Custom Tag Len
NOTE: To enable this menu item, set Custom Tag to Enable.
This menu item selects the number of bytes in the tag.
The default is 8.
Custom Tag Class
NOTE: To enable this menu item, set Custom Tag to Enable.
This menu item selects the class of the custom tag. Class 1, Class 0+, and
Class 1.19 tags are read/write. Class 0 tags are read only. The default is
Class 1.
EPC Mgr Report
This menu item enables EPC and label information to be sent out the network
port. This information can be used by an RFID tag data and labels manager
program. The default is Disable.
Non-RFID Warning
When this menu item is set to Enable, the printer checks to make sure that
non-RFID jobs are not being printed on RFID labels (to prevent RFID labels
from being wasted).
If RFID labels are installed in the printer, and a job is printed with at least one
form that contains no RFID commands, a fault will be declared and the data
for the forms that contain no RFID commands will be absorbed.

Requesting An RFID Report

This procedure prints a summarized RFID report. (This report also includes
validator data if the printer has a validator.)
1. Press the PAUSE key to take the printer offline.
↵ ↵
2. If necessary, press ↓ and
at the same time to unlock the key.
3. Press TEST PRINT. Printer Tests displays.
4. Press + until ODV/RFID Report displays.
↵
5. Press to print the report.
↵ ↵
6. Press ↓ and
at the same time to lock the key, then press PAUSE to
take the printer offline.
7. Press PAUSE again to put the printer online.
101