Printronix SLPA7000 User Manual page 134

Chapter 3
PRINTER CONTROL Menu
Delete Files
Allows you to delete files in the file list. Contact your administrator for
assistance.
Optimize&Reboot
Reclaims flash space from deleted flash files. After pressing
printer to reboot.
Print File List
Prints a summary of the files stored in flash memory and several statistics on
File System usage.
Cancel Key
•
Disable.
•
Enable. When enabled, the
mode to clear all data in the print buffer, and deleted data will not be
printed.
The factory default is Disable. When the Coax/Twinax interface is installed,
the factory default is Enable.
Compatibility
This parameter allows you to make T5000 series thermal printers compatible
with other printers.
When trying to preserve compatibility with respect to barcodes, you may not
always be able to make them equal in size. This is due to the various dot-per-
inch differences between printer types. When an exact match cannot be
made, the barcode is reduced in size so that the form bounds will not be
compromised and the barcode will be readable.
•
Default. Use for optimum performance.
•
Laser. Forces the output to correspond with the laser line of printers.
•
P5000. Forces the output to correspond with the P5000 line of line matrix
printers.
•
T3000. Forces the output to correspond with the T3000 line of thermal
printers.
•
T1006. Forces the output to correspond with the T1006 line of thermal
printers.
The factory default is Default.
134
↵
(CANCEL) key may be used in offline
wait for the