Ribbon Low - Printronix SLPA7000 User Manual

Chapter 3
MEDIA CONTROL Menu
The factory default for Clip Page is Enable.
Error Recover
This option determines how the printer handles data that was printing when
an error occurred.
•
Disable. The printer will not reprint the label that was printing when the
error condition occurred.
•
Enable. The printer reprints the label that was printing when the error
condition occurred.
The factory default is Disable.
Ribbon Width
When Same As Paper is selected, the printer automatically adjusts the ribbon
operating parameters to match the installed media width. In those cases
where the media width is less than the installed ribbon width, the Set In Menu
option should be selected. After selection, the ribbon width is set to the proper
value by pressing the ↓ key and choosing the actual ribbon width using the +
and – keys. The chosen width is then selected by pressing the
factory default is Same As Paper.
Display Ribbon
When enabled, the remaining length of unused ribbon will display on the LCD
(when the printer is online).
The options are Enable (the factory default) and Disable.

Ribbon Low

This item defines the Ribbon Low condition for the ribbon supply spindle.
When set to a specific value, a ribbon low message will display along with a
flashing ONLINE status indicator to indicate the length of ribbon remaining on
the ribbon supply spindle has reached its specified value. The indicator will
continue to flash until the ribbon supply is exhausted. When Disabled, no
ribbon low condition will be indicated. A Ribbon Low condition will not prevent
printing.
The options are Disable, 25m, 50m, 75m, and 100m.
The factory default is Disable.
Rbn Takeup Full
This enables or disables a fault message to display for a Ribbon Takeup Full
condition.
The options are Enable (the factory default) and Disable.
118
Length value is equal to the physical length of a die cut or removable
label. When using Mark sensing, the Label Length value is the
physical distance from the leading edge of one black mark to the
leading edge of the next black mark.
↵
key. The