Saving A Configuration - Printronix SLPA8000 User Manual

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3. When the desired submenu displays, press the + or – key to scroll
through the values or options.
4. Press the
selected value or option.
5. If there are more submenu values or options you want to change, use the
Menu, ↑, ↓, +, and – keys to access the value and the
At any time, you may press the Menu key to return to the Main menu.
6. At any time, you may press the Pause key twice to exit the Configuration
menu and place the SLPA online. Once you have finished selecting all
your options, save your configuration.
IMPORTANT
If you do not save your configuration, all your new values will be lost
when you power off the SLPA.

Saving A Configuration

You can save up to eight different configurations to meet eight unique print job
requirements. These configurations are saved and stored in the SLPA and
are not lost when the SLPA is turned off.
NOTE: If the Protect Configs. option is enabled, the new configuration will not
Follow these steps to save a new configuration:
Print Mode
Media Handling
Paper Feed Shift
Label Length
Label Width
Ver Image Shift
Hor Image Shift
Orientation
Gap/Mark Sensor
Auto Calibrate
Active IGP Emul
Save Config.
Power-Up Config.
SMT: Status (if RFID is installed. Refer to the RFID Labeling
Reference Manual .)
PAA: Status (if RFID is not installed)
↵
key to select a value. An asterisk (*) displays next to the
be saved until the existing configuration is deleted.
Saving A Configuration
↵
key to select it.
73