Printing A Configuration - Printronix SLPA7000 User Manual

Chapter 3
Moving Within The Configuration Menu
4. Before saving the modified configuration, you must delete the original
configuration if the Protect Configs. option is enabled.
a. Press the ↑ or ↓ key until the following message displays:
b. Press the + or – key to cycle through the options (1-8). When the
5. Save the new configuration as described in the "Saving A Configuration"
on page 75. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.
6. Print a copy of this newest configuration and store it in a safe place. Refer
to "Printing A Configuration" on page 78.

Printing A Configuration

We recommend that you print and store your configurations for future
reference. The printout provides a list of the parameters that were set when
you configured the printer.
To print a configuration:
1. Press the
2. Press the ↓ key until the following message displays:
78
Delete Config.
1*
desired number displays, press the
message displays:
Deleting
Configuration
Then, the following displays when it is deleted:
Delete Config.
X *
. .
key until the following message displays:
.
MENU MODE
CONFIG. CONTROL
Print Config.
Current*
↵
key to select it. The following