Finish The Installation - Printronix SLPA7000 User Manual

Appendix F

Finish The Installation

Finish The Installation
IMPORTANT
The printer may not recognize the RFID encoder until you download the
latest printer operating system software into the flash memory.
1. If an RFID Emulation Software CD is included in your kit, go to step 2;
otherwise, go to step 3.
2. Refer to the configuration printout you made on step 1, page 369.
Compare the Program File version number (e.g., 364519) with the version
number printed on the CD (the first six digits only, e.g., 364492).
a. If the CD number is lower than the Program File number, go to step 3.
b. If the CD number is higher, download the latest printer operating
3. Beginning with "Loading Media And Ribbon" in your smart label RFID
printer Quick Setup Guide , do the procedures up to and including "Run A
Barcode Demo Test."
When you have completed the bar code demo test, installation is
complete.
378
system software into the flash memory. (Refer to the
SL5000e/T5000e User's Manual .)