Saving A Configuration - Printronix SL4M User Manual

Chapter 4

Saving a Configuration

Saving a Configuration
You can save up to eight different configurations to meet eight unique print job
requirements. These configurations are saved and stored in the printer and
are not lost when the printer is turned off.
NOTE: If the Protect Config. option is enabled, the new configuration will not
Follow these steps to save a new configuration:
1. Press the
2. Press the Right key until CONFIGURATION displays.
3. Press the ↵ key to enter the CONFIGURATION menu.
4. Press the Down key until the following option is selected:
Save Config.
5. Press the Left or Right keys to cycle through the options (1-8).
NOTE: Factory is not listed because changes made to the factory
6. When the desired number displays, press the ↵ key to select it. The
following message displays briefly:
Saving
Configuration
When processing is completed, the display shows:
Save Config.
X*
NOTE: If the configuration number has been previously saved and Protect
CONFIG. EXISTS
Delete First
If the above occurs, see "Modifying a Saved Configuration" on page 152,
step 4.
7. Print your configuration and store it in a safe place for future reference.
Refer to "Printing a Configuration" on page 154.
148
be saved until the existing configuration is deleted.
. .
key to enter the menu configuration.
.
CONFIGURATION
1*
configuration cannot be saved under Factory.
Config. is enabled under the CONFIGURATION menu, the following
error message displays: