Printronix SLPA7000 User Manual page 360

Appendix D
Flash Memory
NOTE: The numeric portion of the file name will match the numbers of the
15. At the command prompt type:
copy /b filename.dwn LPT1<Enter>
(where filename .dwn is file name you noted in step 14.)
NOTE: If you are loading the file using the LPT2 port on the computer, type
The 9600 baud rate is the only selection some systems can use. The
baud rate information entered in the above commands must match the
selection you made in step 8.
You can download the optional fonts one at a time by entering one file
name per the copy command or you can copy multiple files in one copy
command.
To download one file at a time, enter the following at the command
prompt:
copy /b filename.dwn LPT1<Enter>
To download multiple files, enter the following at the command prompt,
for example:
copy /b filename1.dwn+filename2.dwn+...LPT1<Enter>
16. While the font file is copied into flash memory, the printer LCD informs
you of the load process and status. When the new file is successfully
loaded into memory, the printer will reset itself and go online.
17. To verify that the optional fonts have been downloaded:
a. Perform a configuration printout.
b. Select PRINTER CONTROL
NOTE: The optional font typefaces cannot be selected via the printer control
18. Press the PAUSE key to place the printer online and return the printer to
normal operation.
360
font typefaces listed in Appendix E of the PGL and VGL
Programmer's Reference Manuals and provide you with a description
and print sample of the typeface.
the following command:
copy /b filename.dwn LPT2<Enter>
(where filename .dwn is a file you noted in step 14.)
If you are loading the file using the serial port on the computer, type
the following commands:
mode COM1:9600,N,8,1,P<Enter>
copy /b filename.dwn COM1<Enter>
(where filename .dwn is a file you noted in step 14.)
— OR —
will appear with the same part number file name you downloaded, but
with an .sf extension.
panel. They can only be selected via a software command from the
host.
View File List. The new file names