Printronix SLPA7000 User Manual page 54

Chapter 2
RFID System Configuration Parameters
GPIO Table Control
Sets the required GPIO Table Control.
1. Press the Menu key to take the SLPA offline and into Menu mode.
2. Press the Menu key until GPIO CONTROL displays.
3. Press the ↑ or ↓ key to scroll through the GPIO CONTROL submenu until
GPIO Table displays in the first line of the LCD.
4. Use the + or – key to scroll through the parameters until User Defined
displays on the second line of the LCD.
5. Press the
54
↵
key to select User Defined.