Printronix SLPA7000 User Manual page 138

Chapter 3
PRINTER CONTROL Menu
Standard Chars.
This menu entry permits you to adjust the thickness or font weight of standard
text fonts.
The range is 0 to 512, and the factory default is 340.
Bold Chars.
This menu entry permits you to adjust the thickness or font weight of bold text
fonts. This menu will not take effect unless you save it in a configuration and
the printer is powered up with that configuration.
The range is 0 to 512, and the factory default is 448.
Extra Bold Char.
This menu entry permits you to adjust the thickness or font weight of extra
bold text fonts.
The range is 0 to 512, and the factory default is 504.
NOTE: For most applications, the default settings for font memory are
OCR-A Chars.
Character weight adjustment of resident OCR-A characters.
The range is 0 to 512, and the factory default is 384.
OCR-B Chars.
Character weight adjustment of resident OCR-B characters.
The range is 0 to 512, and the factory default is 304.
Tall Characters
Increases the point height of resident Intellifont characters.
•
Enable. Increases the point height of resident Intellifont characters
approximately 10%.
•
Disable. Standard resident font character point height is maintained.
The factory default is Disable.
138
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.