Connector Pinouts - Oracle ZFS Installation Manual

7320
The following options are available for clustered storage controllers.
Note: When you cluster a 7320, you must identically configure the cards in both of the
clustered storage controllers, and you must identically configure all optional NIC/HBA cards
used in the clustered storage controllers in both chassis.
Slot
0
0
0
0
0
1
2

7320 Connector Pinouts

The serial management connector (SERIAL MGT) is an RJ-45 connector and is a terminal
connection to the SP console.
The network management connector (NET MGT) is an RJ-45 connector on the motherboard
and provides an alternate terminal interface to the SP console.
There are four RJ-45 Gigabit Ethernet connectors (NET0, NET1, NET2, NET3) located on the
motherboard that operate at 10/100/1000 Mbit/sec. These network interfaces must be
configured before use.
54 Oracle ZFS Storage Appliance Installation Guide • January 2014 E48491–02
Type Part Number Vendor Part
PCIe 375-3617-01 Intel Niantic
PCIe 375-3696-01 Mellanox
PCIe 375-3606-03 MHJH29-XTC
PCIe 375-3481-01 Intel EXPI9404PT QP Copper NIC
PCIe 371-4325-01 QLogic
PCIe 542-0298-01 Sun
PCIe 375-3609-03 Sun Thebe
Description Note
DP Optical 10GE NIC Optional Recommended Front-end
InfiniBand HCA Optional Recommended Front-end
InfiniBand HCA Optional Recommended Front-end
Optional Recommended Front-end
8Gb DP FC HBA Optional FC Target or Initiator (Backup)
Fishworks Cluster Card 2 Cluster Base Configuration
External SAS HBA Cluster Base Configuration