Persistent Reserve Out Command
Persistent Reserve Out Command
The Persistent Reserve Out command is used to register Reservation Keys and create
Persistent Reservations using these keys.
TABLE 3-90 Persistent Reserve Out Command
Byte
7
0
1
2
3
(MSB)
thru
6
7
(MSB)
thru
8
9
Parameter
Service Action
Scope
Type
Parameter List Length
136 T10000: Interface Reference Manual
6
5
Operation Code (5Fh)
Reserved
Scope
Parameter List Length (18h)
Value
Persistent Reserve function to perform
00h = Register. Register a Reservation Key.
01h = Reserve. Create a persistent reservation using a
previously registered reservation key.
02h = Release. Release a persistent reservation
03h = Clear. Remove all reservation keys and reservations
04h = Pre-empt. Take over a reservation previously made by
another initiator
05h = Pre-empt and Abort. Take over a reservation and abort
commands
06h = Register and Ignore existing key
00h = Logical Unit reservations
Type of reservation to make or release
03h = Exclusive Access
06h = Exclusive Access, registrants only
Length of parameter data sent (must be 18h)
Bit
4
3
2
Service Action
Reserved
Control Byte
1
0
Type
(LSB)
(LSB)
August 2016