Using The Api With The Maximum Security Profile Enabled - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems
After you have verified that the Polycom HDX system and your computer or control system are both
configured appropriately, set up both devices as follows:
1 Power off the computer or control system and the Polycom HDX system.
2 Use an RS-232 cable to connect the computer or control system RS-232 port to an RS-232 port on
the Polycom HDX system as shown in the following illustrations. This connection may require the
Null Modem Adapter
To connect a computer to a Polycom HDX 9006 system:
To connect a computer to a Polycom HDX 9001, Polycom HDX 9002 or Polycom HDX 9004 system:
To connect a computer to a Polycom HDX 8000 or HDX 7000 series system:
3 Power on the computer or control system and the Polycom HDX system.
4 From the computer or control system, start a serial session using HyperTerminal or another
appropriate utility.
5 If prompted, enter your password or user name and password.

Using the API with the Maximum Security Profile Enabled

When configured with the Maximum Security Profile, API sessions using a LAN Connection (Telnet) are not
supported, and API sessions using an RS-232 port require you to log in using a valid user name and
Polycom, Inc.
on page 102.
IOIOIO
Using the API
105