Security Parameters; Provisioning Updated Pki Certificates And Crls - Polycom G7500 Reference Manual

Security Parameters

Topics:
▪

Provisioning Updated PKI Certificates and CRLs

▪ Security Parameters
This section describes available security configuration parameters. Included are permitted values and, if
applicable, guidance for configuring related parameters.
Provisioning Updated PKI Certificates and CRLs
During provisioning, your G7500 system checks if a new public key infrastructure (PKI) certificate is just
an updated version of an installed certificate.
If the certificate contents have changed since it was last successfully provisioned or manually installed
(e.g., there's a new expiration date), the new certificate is applied and the older one is deleted. If the
certificate hasn't changed, the new certificate is ignored.
This is not the case with certificate revocation lists (CRLs), which are replaced each time your system is
provisioned even if the CRL hasn't changed.
Security Parameters
Use the following parameters to configure security settings on your G7500 system.
sec.access.maxSessions
Sets the maximum number of connected sessions through the system web interface and
command-line API (SSH or telnet).
50 (default)
45
40
35
30
25
20
15
10
sec.access.room.accessSettings.enable
Specifies whether the User Settings screen is accessible through the local interface.
0 (default)
1
sec.auth.portLockout.failedLoginWindow
Polycom, Inc. 61