User Interface Customization; Security Setting Management - Polycom RealPresence Group Series Administrator's Manual

User Interface Customization

You can use the RealPresence Group Series system web interface to configure how information is
displayed for end users on the Home screen of the system local interface.
Home Screen Icons appear in the lower center of the system local interface, three at a time. By default,
users see the icons shown in the following table in this location.
Icon

Security Setting Management

To configure your RealPresence Group Series system security settings using the system web interface,
use a supported browser with cookies enabled. For a list of supported browsers and version numbers,
refer to the Polycom RealPresence Group Series Release Notes .
To access the system web interface, open a web browser and enter the IP address of the system using
the https protocol; for example, use the format https://10.11.12.13.
Caution: The HTTPS protocol ensures that the configuration of all login information (such as user
names and passwords) is transmitted using an encrypted channel, including those user
names and passwords used to communicate with third-party systems on your network. Using
HTTPS severely limits the ability of anyone on the network to discover these credentials. For
this reason, all attempts to use the system web interface via HTTP are redirected to the
HTTPS interface.
You can find security settings and passwords in the system web interface at Admin Settings > Security.
Settings are under different sections of the security interfaces. In accordance with local laws and
regulations, not all security settings are available in all countries.
Related Links
Access the System Web Interface
Polycom, Inc.
Name
Camera
Opens the Camera Control screen.
Place a Call
Opens the Place a Call screen, where you can
manually dial a call, or can select a contact name from
a list.
Content
Appears only when a content source is detected.
on page 19
Getting Started
17