Connecting Polycom Cameras - Polycom HDX series Reference Manual

Connecting Polycom Cameras

You can connect Polycom HDX systems to a Polycom Eagle Eye, PowerCam™
or PowerCam Plus camera from Polycom, or to other supported cameras. You
must use a PowerCam Plus as the main camera, not as a secondary camera.
Refer to the release notes for a list of supported PTZ cameras.
Polycom Eagle Eye as the Main Camera
You can connect a Polycom Eagle Eye camera (part number 8200-23600-001 or
8200-23610-001) to a Polycom HDX system as the main camera using:
• HDCI analog camera cable shown on page
1 2
1
Polycom Eagle Eye as the Second Camera
You can connect a Polycom Eagle Eye camera (part number 8200-23600-001 or
8200-23610-001) to a Polycom HDX system as the second camera using:
• HDCI analog camera cable shown on page
• Power supply. Use only the approved power supply from Polycom (part
number 1465-52621-036). Do not exceed 12 Volts at 3 Amps.
1 2
2
2-16
PC CARD
100-240VAC 50/60Hz 4A
1
2-16
PC CARD
100-240VAC 50/60Hz 4A
2
Room Integration
DC IN 12V
1 - 5