Integrating Video; Connecting Polycom Cameras - Polycom HDX 9006 Integrator's Manual

Integrator's Reference Manual for Polycom HDX Systems

Integrating Video

The following sections describe how to connect cameras to Polycom HDX systems. After you connect a
camera to a Polycom HDX system, refer to the Administrator's Guide for Polycom HDX Systems for
information about configuring the camera options in the user interface.

Connecting Polycom Cameras

You can connect Polycom HDX systems to a Polycom EagleEye 1080, Polycom EagleEye HD, Polycom
EagleEye View, Polycom EagleEye II, Polycom EagleEye III, Polycom EagleEye Director,
Polycom PowerCam™, or PowerCam Plus or camera from Polycom, or to other supported cameras. Refer
to the release notes for the software release installed on the Polycom HDX system for a list of supported
PTZ cameras.
Points to Note about Polycom Cameras:
• The Polycom EagleEye HD connection diagrams can be applied to Polycom
EagleEye II cameras on Polycom HDX 9006 systems only. The diagrams can
also be applied to EagleEye III cameras on all Polycom HDX 9000 series
systems.
• Polycom HDX 6000 series, Polycom HDX 7000 series, and Polycom HDX 8000
series systems must be connected to one of the Polycom EagleEye cameras to
receive signals from the remote control. Point the remote control at the camera
to control those Polycom HDX systems.
Polycom EagleEye HD Camera as the Main Camera up to 30 ft Away
You can connect a Polycom EagleEye HD camera (part number 8200-23600-001
8200-23610-001, 8200-08270-xxx, or 8200-08260-xxx) to a Polycom HDX 9000 Series system
as the main camera using:
●
HDCI Analog Camera Cable
1
Polycom, Inc.
on page 54.
1
Room Integration
7