Supplying A Password For Bridge Calls; About Multipoint Viewing Modes - Polycom HDX Series User Manual

User's Guide for Polycom HDX Room Systems

Supplying a Password for Bridge Calls

About Multipoint Viewing Modes

24
To place a multipoint call using a multiple-site directory entry:
1. Press Directory on the remote control.
2. Find the multiple-site entry in the directory list.
3. Press Call to place the call.
To place a cascaded multipoint call:
1. Place a multiple-site call from the directory, or place calls one at a time to
several other sites.
2. Ask each site to call additional sites.
Bridges such as Polycom MGC sometimes require you to enter a password in
order to join a conference. Depending on your system configuration, you can
set up the system to enter the meeting password for you.
To configure a meeting password:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Enter the password in the Meeting Password field in one of these ways:
— Press the remote control number buttons, using the text-entry method
commonly used with cell phones.
— Press Keyboard to use the onscreen keyboard to enter
characters.
4. Press Home to save your change and return to the home screen.
If you need to generate touch tones (DTMF tones), press
control, or press
number buttons.
What you see during a multipoint call can vary depending on how the
Polycom HDX system is configured, the number of sites participating, the
number of monitors you are using, and whether content is shared. The
multipoint viewing mode configured on the host system is the one used in the
and choose Touch Tones. Then use the remote control
on the remote
© Polycom, Inc.