Mirroring The Camera Positions; Automatic Voice Tracking; Tracking To Camera Presets - Polycom ViewStation H.323 User Manual

Mirroring the Camera Positions

Automatic Voice Tracking

Tracking to Camera Presets

© Polycom, Inc.
You can match the presets on the far-site camera with those on the near-site
camera (provided your far-site camera shares this functionality) by
following these steps:
1. Press the FAR button on the remote during a video call.
2. Press the AUTO button on the remote to mirror the preset positions on
the near-site.
3. To turn off preset camera positions on the far-site, press the FAR
button on the remote, and use the arrow or zoom buttons to move the
camera.
The main camera can automatically move to whoever is speaking. The first
time it moves to the person, it may take several seconds of continuous
speech to locate the speaker. After that, it will pick out the position quickly
(unless, of course, they have moved). The main camera can also track to
preset positions.
1. To have the camera move to whoever is talking, press the AUTO
button once. A camera icon with a motor attached will appear in the
upper right corner of the main monitor.
2. To set the camera to track to camera presets, press the AUTO button
twice.
3. To turn automatic tracking off, pan, tilt, or zoom the camera.
The ViewStation H.323 main camera can track to preset positions, which
gives you greater flexibility and control of automatic voice tracking. When
automatic voice tracking is activated, the main camera will track
automatically to participants speaking from preset positions.
To track to preset positions, press the AUTO button twice. The Track To
Presets icon will appear in the top right corner of the screen. To turn
off tracking to camera presets, press the AUTO button or pan, tilt, or zoom
the camera.
33
Chapter 4 Camera and Sound
ViewStation H.323 User's Guide