Enabling Automatic Voice Tracking (Viewstation Ex And Fx Only) - Polycom ViewStation EX Getting Started Manual

Enabling Automatic Voice Tracking (ViewStation EX and FX only)

© Polycom, Inc.
To turn the PIP on or off during a video call:
If the PIP is not showing, press
If the PIP is showing, press
On remote controls that do not have a PIP button, press
To swap the views shown in the PIP and the main screen:
1. If the PIP is not showing, press
remote controls that do not have a PIP button, press
2. Press Camera. Skip this step if your remote control does
not have a Camera button.
3. Select the Swap PIP icon.
You can set the main camera on your system to automatically point at
whoever is speaking. When you enable this automatic voice tracking
feature, you can view the people who are speaking throughout the
meeting without having to manually adjust the camera at all.
You can also enable automatic voice tracking to camera presets. This
feature automatically moves the camera to the preset location that is
closest to the speaker. Use this feature if you expect the meeting
participants to sit or remain somewhat stationary during the meeting.
To enable automatic voice tracking:
>>
Press Auto.
The near site camera icon changes to
you know that automatic voice tracking is enabled.
To disable automatic voice tracking:
>>
Press Auto two more times.
The near site camera icon changes to
automatic voice tracking is disabled.
C
ONTROLLING
PIP to turn it on.
PIP to turn it off.
PIP to turn it on. On
on the screen to let
to let you know that
W Y S
HAT OU EE
Near.
Near.
17