Automatic Voice Tracking; Automatic Tracking Of Camera Presets; Adjusting Sound - Polycom ViewStation SP128 User Manual

Chapter 3

Automatic Voice Tracking

Automatic Tracking of Camera Presets

Adjusting Sound

© Polycom, Inc., 2001
4. Press a NUMBER button on the remote control to assign that
preset button.
To select a camera preset:
1. Use the NEAR or FAR buttons on the remote control to
determine which camera's preset to activate.
2. Immediately press the appropriately NUMBERED button on the
remote control.
The main camera automatically moves to whomever is speaking
during a video call. The ViewStation SP requires a few seconds to
locate the speaker and once the ViewStation SP has located the
speaker, the ViewStation SP sets his/her position and moves the
camera automatically. If the speaker moves or a new speaker is
introduced, the ViewStation SP adjusts for the current speaker.
To set automatic voice tracking, press the AUTO button once if auto
tracking is on or twice if auto tracking is off. A Camera icon with a
motor attached is displayed in the upper right corner of the main
television monitor.
The main camera automatically tracks to preset positions. To set the
camera to track to camera presets, press the AUTO button twice.
To turn automatic tracking off press the AUTO button.
The volume of the ViewStation SP is related to the volume of the
television monitor. For best results:
1. Set the volume on the television monitor to half its maximum
volume.
2. Using the VOLUME buttons on the remote control, set the
ViewStation SP volume at a comfortable hearing level.
To prevent far-site participants from hearing your conversation,
press the MUTE button on the remote or microphone pod. The red
light on top of the microphone pod is illuminated. When the MUTE
91
Using the ViewStation SP
ViewStation SP User Guide