Automatic Voice Tracking; Automatic Tracking Of Camera Presets - Polycom ViewStation EX User Manual

Chapter 3

Automatic Voice Tracking

Automatic Tracking of Camera Presets

ViewStation User Guide
The following table applies to camera presets:
Preset Indication
Transparent
Solid Yellow
To clear all of the presets, press the
4. Press a NUMBER button on the remote control to assign that
preset button.
To select a camera preset:
1. Use the NEAR or FAR buttons on the remote control to
determine which camera preset to activate.
2. Immediately press the appropriately numbered button on the
remote control.
The main camera automatically moves to whoever is speaking
during a video call. The ViewStation requires a few seconds to locate
the speaker and once the ViewStation has located the speaker, the
ViewStation sets his/her position and moves the camera
automatically. If the speaker moves or a new speaker is introduced,
the ViewStation adjusts for the current speaker.
To set automatic voice tracking:
1. Press the AUTO button once to turn auto tracking on.
2. Press the AUTO button twice to turn auto tracking off.
A Camera icon with a motor attached is displayed in the upper right
corner of the main television monitor.
The main camera automatically tracks to preset positions. To set the
camera to track to camera presets:
1. Press the AUTO button twice to set auto tracking mode.
2. Press the AUTO button once to turn automatic tracking off.
Preset is empty
Preset is assigned
128
Using the ViewStation
Meaning
#
key on the remote control.
www.polycom.com